CO2 Galvo Marking & Cutting
Small Format Cutting
Companies who require small and or precise cutting and cannot justify or fit a larger system could be ideal for one of Vytek's smaller systems. The FX 3 series combines the speed and precision of our larger system but in a compact enclosed form. Review the following questions to see what the right system is for your company.
If you answered yes to many of these questions, then you should be considering the one of the following Laser Systems.
The FX3 Series is a very versatile gantry-based system. It has a small footprint, is enclosed and is on castors for portability but is built to run for long periods of time. It is a Class I system that can be used in any environment. The FX3 ranges in size from our 36”x24” to 24" x 51" to our super size 51”x36”. To learn more about the FX3, click the FX3 button on the left.
The CO2CAB and the GL are part of the Vytek Galvo Line of lasers. The CO2CAB is an enclosed unit with the largest work area of 500mm x 500mm. It is an ideal solution for marking and cutting at very high speeds and when the product to be cut is less then .1/8" thick .
Information to help you decide which system best fits your needs
- What is Vector or Raster
- Wattage needed to cut
- Air or water cooled chiller
- Cut material larger than 4x4'
- Cut material smaller than 4x2'
- Fast, large format cutting
- Raster material smaller than 4'
- Fast, large format raster
- Do I need fume extraction
- Wattage needed to raster
- What is marking
- Galvo or Gantry
- Mark metal
- Mark wood
- Mark objects larger than 6x6"
- What software do I need
- Can I network the laser
- What about training?