Vytek MX Fiber Marking System

The MX Fiber Marking System series Fiber based marking system was designed to bridge the best of Galvo systems with the flexibility of gantry systems. The MX Fiber Marking System series was designed as an alternative to Galvo systems for marking applications where part size or automation is impractical. The MX Fiber Marking System is an extremely productive with very large working areas and at very competitive price ratio to galvo systems. With 3 MX models to choose from with working areas from 12” x 24”, 24” x 36” and 24” x 51”.

Advantages of Gantry marking

• • Wide range of part set up methods, tray load, template layout, step and repeat or just putting parts against the standard fence.
• • With a fully loaded table an operator can walk away from the process and have time to do something else
• • Smaller spot size then a typical galvo system
• • Capable of cutting light metals (model and power dependent)
• • Cost of operation is very low with the system operating at 110 volts and using as little as 12 amps.
• • Very low maintenance, quiet, and a small foot print.
• • Fully enclosed system so can be put almost anywhere in the shop.
• • Very affordable technology

• Very easy to program and to use